Buying an efficient air conditioner will not suffice your requirements unless it is installed in a proper way. Remember any air conditioning installation should be done by a technician from the authorized service center or a professional installation agency only. These professionals are well-trained to follow safety norms and can install the unit according to this Installation Manual.
 |
| Air Conditioning Installation |
To search an appropriate technician in your vicinity, you can ask for a dealer’s recommendation or browse online. Most of the companies dealing in air conditioners installation have their authorized service centers in different areas. These technicians specialize in the company’s products and provide better services as compared to general technicians.
Before referring any technician for the installation of the cooling appliances, consider the following:
- Type of air conditioner you want to install – Split or Window.
- Area/room where your air conditioner needed to be installed.
- The relative distance between the outdoor and indoor unit.
- Location of the outdoor unit.
Here are the few tips for an effective air conditioning installation process:
- Each electrical appliance is accompanied by an instruction manual. These manuals contain important instructions regarding the installation and efficient usage of electrical appliances. To ensure a safe installation, these manuals should be necessarily followed.
- During the installation, provisions should be made to guard the air conditioner against any natural calamities like earthquakes. If the air conditioner is not installed appropriately, accidents may occur and hence, there is need to take the required safety measures.
- Since high power shall be required for the operation of the air conditioner, the appliance should be grounded; otherwise, it may cause electrical shocks. Grounding refers to connecting the unit with the earth via a wire. A ground fault is indicated by a tripped circuit breaker or any open fuse.
- Air conditioning installation should be done after cutting off the power supply only.
- Do not pull, twist, or press the power supply cord to remove it from the socket. Make sure, you do not break them too.
 |
| Air Conditioning Installation |
- Refrain using a damaged power cable, a plug, or a loose socket; or else, there could be a fire or any other mishaps.
- Always opt for a rated voltage power circuit for the air conditioner.
- The air conditioner should be installed away from flammable gases or combustible.
- Proper planning is required to set up the vent of the water outlet. Water is generated during the condensation process and due to water accumulation, the coils can get choked.
- If a refrigerant gas has leaked during the air conditioning installation work, open the door and windows of the room immediately. If this leaked refrigerant gas comes in contact with fire, it may cause fatal accidents – so be careful.
- The outdoor unit should be installed properly in a location and where the unit’s weight is supported. Any negligence can lead to injuries or losses in cases of any accidents.
- The distance between the indoor and outdoor units should be minimized in order to avoid loss of cooling during transit and also, to reduce costs of the pipes that connect the indoor and outdoor unit.
- Ensure that the power supply cord is long enough to connect the power supply to the main unit. Avoid using an extension cord as a safety precaution.
 |
| Air Conditioning Installation |
Safety Precautions After Installation
- Once the air conditioning installation is completed, the electric components, such as a switch or power supply, must not be accessible to children.
- Do not touch the main power supply with wet hands especially when you are barefoot.
- Never modify the unit by removing any of the safety guards or by by-passing any of the safety interlock switches.
- After the installation work, perform a trial operation to check for any problems and only in front of the technician.
These handy tips will help you to ensure proper installation of your air conditioner without a glitch.
No comments:
Post a Comment